{"title":"3D Printers","description":"","products":[{"product_id":"bambu-lab-a1-mini-3d-printer","title":"Bambu Lab A1 Mini 3D Printer","description":"\u003cp\u003eThe A1 Mini is where most people should start. It's small, quiet, self-levelling, and it prints beautifully out of the box with almost no tuning. If you've been put off 3D printing by stories of warped first layers and hours of calibration — this is the machine that made those stories obsolete.\u003c\/p\u003e\n\u003cp\u003e180mm cubed of build volume sounds modest until you realise how much of what you'll actually print fits inside it. Toolhead tops out at 500 mm\/s, so prints that used to take a weekend take an evening.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eFree filament with printer\u003c\/h3\u003e\n\u003cp style=\"padding: 14px 16px; border-left: 3px solid #00A0C4; background: rgba(0,160,196,0.06);\"\u003eAdd \u003cstrong style=\"color: #0d1080;\"\u003ePLA Basic\u003c\/strong\u003e to your cart alongside the printer and we'll take it off automatically at checkout — \u003cstrong\u003e1 free spool\u003c\/strong\u003e with the A1 Mini, \u003cstrong\u003e2 free spools\u003c\/strong\u003e with the Combo. No code needed. Pick whichever colours you like.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eWhich one should I get?\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"border-bottom: 2px solid rgba(128,128,128,0.35);\"\u003e\n\u003ctd style=\"padding: 10px 12px 10px 0;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px 8px; text-align: center;\"\u003e\u003cstrong\u003eA1 Mini\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px 0; text-align: center;\"\u003e\u003cstrong\u003eCombo\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding: 9px 12px 9px 0; opacity: 0.65;\"\u003eColours per print\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 8px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 0; text-align: center;\"\u003eUp to 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding: 9px 12px 9px 0; opacity: 0.65;\"\u003eAMS Lite included\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 8px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 0; text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding: 9px 12px 9px 0; opacity: 0.65;\"\u003eFree PLA Basic\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 8px; text-align: center;\"\u003e1 spool\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 0; text-align: center;\"\u003e2 spools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 9px 12px 9px 0; opacity: 0.65;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 8px; text-align: center;\"\u003e$298\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 0; text-align: center;\"\u003e$488\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top: 14px;\"\u003eThe honest answer: if you only ever print single-colour functional parts, save the $190. If you want multi-colour models, text and logos in a second colour, or you're buying this for a household that will inevitably want rainbow keychains — get the Combo. Retrofitting AMS Lite later costs more than buying it now.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color: #0d1080;\"\u003eA1 Mini\u003c\/strong\u003e — A1 Mini 3D Printer, plus 1× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #0d1080;\"\u003eA1 Mini Combo\u003c\/strong\u003e — A1 Mini 3D Printer, AMS Lite, plus 2× PLA Basic free.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eFilament it likes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color: #0d1080;\"\u003ePLA, PETG and TPU\u003c\/strong\u003e run beautifully with no modifications — that covers the vast majority of what people print.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #0d1080;\"\u003eCarbon and glass fibre reinforced\u003c\/strong\u003e filaments will print well too, but they're abrasive and will chew through a stainless steel nozzle. Upgrade to a hardened steel hotend first — we stock them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #0d1080;\"\u003eABS, ASA, PC and PA\u003c\/strong\u003e aren't recommended. The A1 Mini is open-frame, and those materials need an enclosure to stop them warping. If that's your use case, this isn't the machine.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eWarranty \u0026amp; support\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1 year from date of purchase\u003c\/strong\u003e, handled by Convergent Systems Pte Ltd, Bambu Lab's authorised service partner in Singapore.\u003c\/p\u003e\n\u003cp\u003eWe don't offer paid setup — you genuinely won't need it, the printer walks you through calibration itself. But if you get stuck on settings, slicer profiles or a print that won't behave, ask us. Happy to help.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eDelivery \u0026amp; collection\u003c\/h3\u003e\n\u003cp\u003eBoxed, this is 8.1kg for the A1 Mini and 10kg for the Combo, which puts it in our heaviest delivery band. \u003cstrong\u003eSelf-collection is free\u003c\/strong\u003e — worth considering on an item this size.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"A1 Mini","offer_id":42806492397653,"sku":"PF002-M","price":298.0,"currency_code":"SGD","in_stock":true},{"title":"A1 Mini Combo (with AMS Lite)","offer_id":42806492430421,"sku":"PF002-M+SA005","price":488.0,"currency_code":"SGD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7517\/2949\/files\/HERO_PF002-M_2cc74c50-cff9-47c7-9d44-4ef751904257.webp?v=1785461130"},{"product_id":"bambu-lab-a1-3d-printer","title":"Bambu Lab A1 3D Printer","description":"\u003cp\u003eThe A1 is the A1 Mini grown up. Same easy, self-levelling, no-nonsense printing — but with a 256mm cubed build volume, which is where most of the models you actually want to print live. Full-size helmets, large functional parts, tall vases, multi-part prints in one go.\u003c\/p\u003e\n\u003cp\u003eIf you've been sizing up the Mini and quietly wondering whether 180mm will be enough, it probably won't be. This is the one to buy.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFree filament with printer\u003c\/h3\u003e\n\u003cp style=\"padding:14px 16px;border-left:3px solid #00A0C4;background:rgba(0,160,196,0.06);\"\u003eAdd \u003cstrong style=\"color:#0D1080;\"\u003ePLA Basic\u003c\/strong\u003e to your cart alongside the printer and we'll take it off automatically at checkout — \u003cstrong\u003e3 free spools\u003c\/strong\u003e with either configuration. No code needed. Pick whichever colours you like.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhich one should I get?\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"border-bottom:2px solid rgba(128,128,128,0.35);\"\u003e\n\u003ctd style=\"padding:10px 12px 10px 0;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px;text-align:center;\"\u003e\u003cstrong\u003eA1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;text-align:center;\"\u003e\u003cstrong\u003eCombo\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eColours per print\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eUp to 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eAMS Lite included\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eFree PLA Basic\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e3 spools\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e3 spools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e$425\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e$625\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top:14px;\"\u003eThe $200 question is whether you want multi-colour. AMS Lite handles up to four filaments and swaps between them mid-print — that's what makes text, logos and two-tone models possible. Buying it later as a separate add-on costs more than taking the Combo now.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eA1 or A1 Mini?\u003c\/h3\u003e\n\u003cp\u003eBuild volume is the whole difference: \u003cstrong style=\"color:#0D1080;\"\u003e256 × 256 × 256mm\u003c\/strong\u003e here against 180mm cubed on the Mini — roughly \u003cstrong\u003e2.9× the printable space\u003c\/strong\u003e. The A1 also runs a hotter bed at 100°C, a larger 3.5in screen, and hardened steel extruder gears.\u003c\/p\u003e\n\u003cp\u003eEverything else is familiar: same 500 mm\/s toolhead, same auto-levelling, same one-touch calibration. If your prints keep bumping into the Mini's walls, this is the upgrade.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eA1\u003c\/strong\u003e — A1 3D Printer, plus 3× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eA1 Combo\u003c\/strong\u003e — A1 3D Printer, AMS Lite, plus 3× PLA Basic free.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFilament it likes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003ePLA, PETG and TPU\u003c\/strong\u003e run beautifully with no modifications — that covers the vast majority of what people print.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eCarbon and glass fibre reinforced\u003c\/strong\u003e filaments will print well too, but they're abrasive and will chew through a stainless steel nozzle. Upgrade to a hardened steel hotend first — we stock them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eABS, ASA, PC and PA\u003c\/strong\u003e aren't recommended. The A1 is open-frame, and those materials need an enclosure to stop them warping. If that's your use case, this isn't the machine.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWarranty \u0026amp; support\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1 year from date of purchase\u003c\/strong\u003e, handled by Convergent Systems Pte Ltd, Bambu Lab's authorised service partner in Singapore.\u003c\/p\u003e\n\u003cp\u003eWe don't offer paid setup — you genuinely won't need it, the printer walks you through calibration itself. But if you get stuck on settings, slicer profiles or a print that won't behave, ask us. Happy to help.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eDelivery \u0026amp; collection\u003c\/h3\u003e\n\u003cp\u003eThis is a large, heavy box. \u003cstrong\u003eSelf-collection is free\u003c\/strong\u003e and worth considering — otherwise delivery falls into our heaviest band.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"A1","offer_id":42809520062549,"sku":"PF002-A","price":425.0,"currency_code":"SGD","in_stock":true},{"title":"A1 Combo (with AMS Lite)","offer_id":42809520095317,"sku":"PF002-A+SA005","price":625.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7517\/2949\/files\/HERO_PF002-A_d45a0d17-d495-466a-863e-2db6617af2aa.jpg?v=1785473173"},{"product_id":"bambu-lab-a2l-3d-printer","title":"Bambu Lab A2L 3D Printer","description":"\u003cp\u003eThe A2L is the one you buy when things keep not fitting. 330 × 320 × 325mm — roughly double the printable space of a 256mm machine — which means full-scale helmets, cosplay props and large functional parts come off the bed in one piece instead of four glued together.\u003c\/p\u003e\n\u003cp\u003eIt's still a bed-slinger, still open-frame, still as easy to live with as the rest of the A-series. Bambu handled the wobble that usually comes with scaling a bed-slinger up by burying two granular dampers in the gantry — sealed chambers of fine particles that kill vibration mechanically rather than in software.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFree filament with printer\u003c\/h3\u003e\n\u003cp style=\"padding:14px 16px;border-left:3px solid #00A0C4;background:rgba(0,160,196,0.06);\"\u003eAdd \u003cstrong style=\"color:#0D1080;\"\u003ePLA Basic\u003c\/strong\u003e to your cart alongside the printer and we'll take it off automatically at checkout — \u003cstrong\u003e2 free spools\u003c\/strong\u003e with the A2L, \u003cstrong\u003e3 free spools\u003c\/strong\u003e with either Combo. No code needed, any colours you like.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhich one should I get?\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"border-bottom:2px solid rgba(128,128,128,0.35);\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 6px;text-align:center;\"\u003e\u003cstrong\u003eA2L\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 6px;text-align:center;\"\u003e\u003cstrong\u003eAMS Lite\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;text-align:center;\"\u003e\u003cstrong\u003eAMS 2 Pro\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eColours per print\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003eUp to 4\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eUp to 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eExpandable with more AMS\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eSealed storage\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eActive drying\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eFree PLA Basic\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e3\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e$595\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e$795\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e$1,050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top:14px;\"\u003e\u003cstrong style=\"color:#0D1080;\"\u003eA2L\u003c\/strong\u003e — single colour. Fine if you print functional parts and prototypes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eAMS Lite Combo\u003c\/strong\u003e — four colours, open-spool design. The sensible middle choice for most people.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eAMS 2 Pro Combo\u003c\/strong\u003e — four colours in a sealed, actively dried enclosure. In Singapore's humidity this is the one that earns its keep: filament stays dry between prints instead of quietly absorbing moisture on your shelf. Worth it if you print often, or plan to run PETG and TPU regularly.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eRoom to grow\u003c\/h3\u003e\n\u003cp\u003eThe A2L supports \u003cstrong style=\"color:#0D1080;\"\u003eup to 19 colours\u003c\/strong\u003e in a single print — a maximum of 4 AMS 2 Pro units plus 1 AMS Lite.\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;opacity:0.7;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Drying while printing is only supported with the AMS 2 Pro Switching Adapter, sold separately.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eA2L\u003c\/strong\u003e — A2L 3D Printer, plus 2× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eA2L Combo (AMS Lite)\u003c\/strong\u003e — A2L 3D Printer, AMS Lite, plus 3× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eA2L Combo (AMS 2 Pro)\u003c\/strong\u003e — A2L 3D Printer, AMS 2 Pro, plus 3× PLA Basic free.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eMore than a printer\u003c\/h3\u003e\n\u003cp\u003eThe A2L takes swappable modules for \u003cstrong\u003eblade cutting\u003c\/strong\u003e and \u003cstrong\u003epen plotting\u003c\/strong\u003e — vinyl, stickers, leather, paper, card. Cutting area is 300 × 300mm, drawing area 300 × 255mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModules are sold separately\u003c\/strong\u003e and aren't included with any configuration here. Worth knowing the machine can grow into it later.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFilament it likes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003ePLA, PETG, TPU and PVA\u003c\/strong\u003e all run well as shipped.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003ePLA-CF and PETG-CF\u003c\/strong\u003e are supported once you swap to a hardened steel nozzle — the stock stainless one won't survive fibre-filled filament for long. We stock the hardened nozzles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eABS, ASA and PC\u003c\/strong\u003e aren't suitable. The A2L is open-frame with an 80°C bed ceiling, deliberately so — those materials need an enclosure and a hotter bed.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWarranty \u0026amp; support\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1 year from date of purchase\u003c\/strong\u003e, handled by Convergent Systems Pte Ltd, Bambu Lab's authorised service partner in Singapore.\u003c\/p\u003e\n\u003cp\u003eNo paid setup — the printer walks you through calibration itself. But if you get stuck on settings, slicer profiles or a print that won't behave, ask us. Happy to help.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eThis is a big machine — \u003cstrong\u003e544 × 529 × 505mm\u003c\/strong\u003e on your desk, and 12.8kg. Measure your space before ordering, and leave clearance behind it for the bed to travel.\u003c\/p\u003e\n\u003cp\u003eBoxed it's 17–21kg depending on configuration, so delivery lands in our upper weight bands. \u003cstrong\u003eSelf-collection is free\u003c\/strong\u003e and worth considering.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"A2L","offer_id":42810683097173,"sku":"PF005-L","price":595.0,"currency_code":"SGD","in_stock":true},{"title":"A2L Combo (with AMS Lite)","offer_id":42810683129941,"sku":"PF005-L+SA005","price":795.0,"currency_code":"SGD","in_stock":true},{"title":"A2L Combo (with AMS 2 Pro)","offer_id":42810683162709,"sku":"PF005-L+SA007","price":1050.0,"currency_code":"SGD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7517\/2949\/files\/HERO_PF005-L_0aa10d95-e5d0-486c-9f85-bdb77c0a7f16.webp?v=1785492612"},{"product_id":"bambu-lab-p1s-3d-printer","title":"Bambu Lab P1S 3D Printer","description":"\u003cp\u003eThe P1S is where the A-series stops being enough. Same 256mm cubed build volume as the A1, but wrapped in a glass-and-plastic enclosure with an activated carbon filter — and that changes what you can print.\u003c\/p\u003e\n\u003cp\u003eEnclosed means a warm, stable chamber. Warm and stable means \u003cstrong\u003eABS, ASA, PA and PC\u003c\/strong\u003e stop warping halfway up and start behaving. If you've been printing functional parts in PLA and quietly wishing they could survive a hot car, a dishwasher, or direct sun, this is the machine that gets you there.\u003c\/p\u003e\n\u003cp\u003eIt's also quicker than the A-series where it counts: \u003cstrong\u003e32 mm³\/s\u003c\/strong\u003e of flow against 28 mm³\/s, and \u003cstrong\u003e20,000 mm\/s²\u003c\/strong\u003e of acceleration against 10,000 mm\/s².\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFree with your printer\u003c\/h3\u003e\n\u003cp style=\"padding:14px 16px;border-left:3px solid #00A0C4;background:rgba(0,160,196,0.06);\"\u003eAdd \u003cstrong style=\"color:#0D1080;\"\u003ePLA Basic\u003c\/strong\u003e to your cart alongside the printer and we'll take it off automatically at checkout — \u003cstrong\u003e2 free spools\u003c\/strong\u003e with the P1S, \u003cstrong\u003e4 free spools\u003c\/strong\u003e with the Combo. No code needed, any colours you like.\u003cbr\u003e\u003cbr\u003eThe Combo also includes a \u003cstrong style=\"color:#0D1080;\"\u003eBIQU Cryogrip Pro Frostbite\u003c\/strong\u003e build plate.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhich one should I get?\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"border-bottom:2px solid rgba(128,128,128,0.35);\"\u003e\n\u003ctd style=\"padding:10px 12px 10px 0;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px;text-align:center;\"\u003e\u003cstrong\u003eP1S\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;text-align:center;\"\u003e\u003cstrong\u003eCombo\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eColours per print\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eUp to 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eAMS included\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eSealed, dry storage\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eFree PLA Basic\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e$649\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e$899\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top:14px;\"\u003eThe AMS isn't just about colour. It's a sealed box with desiccant, which in Singapore's climate means your loaded filament stays dry between prints instead of slowly going brittle on an open spool holder. It also tracks how much filament is left on each roll. Counting the free spools and the build plate, the Combo is close to break-even on the $250 difference.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eP1S\u003c\/strong\u003e — P1S 3D Printer, plus 2× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eP1S Combo\u003c\/strong\u003e — P1S 3D Printer, AMS, BIQU Cryogrip Pro Frostbite build plate, plus 4× PLA Basic free.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFilament it likes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003ePLA, PETG, TPU, ABS and ASA\u003c\/strong\u003e all run well. The enclosure and carbon filter are exactly what ABS and ASA need — no warping, no smell filling the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003ePVA, PA and PC\u003c\/strong\u003e are within reach too, but all three are hygroscopic and demanding. Dry them thoroughly before printing, and ideally print straight from a dryer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eCarbon and glass fibre reinforced\u003c\/strong\u003e filaments aren't recommended on the P1S as it ships — the stainless nozzle won't survive them. A hardened steel nozzle is the minimum if you want to try, and we stock those.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWarranty \u0026amp; support\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1 year from date of purchase\u003c\/strong\u003e, handled by Convergent Systems Pte Ltd, Bambu Lab's authorised service partner in Singapore.\u003c\/p\u003e\n\u003cp\u003eNo paid setup — the printer walks you through calibration itself. But if you get stuck on settings, slicer profiles or a print that won't behave, ask us. Happy to help.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e389 × 389 × 458mm\u003c\/strong\u003e and 12.95kg on your desk. Boxed it's 17.7kg, or 21.6kg with the AMS, so delivery lands in our upper weight bands. \u003cstrong\u003eSelf-collection is free\u003c\/strong\u003e and worth considering.\u003c\/p\u003e\n\u003cp\u003ePrinting ABS or ASA? Put it somewhere ventilated regardless of the filter — enclosure and carbon filtration reduce fumes, they don't eliminate them.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"P1S","offer_id":42810980565077,"sku":"PF001-U","price":649.0,"currency_code":"SGD","in_stock":true},{"title":"P1S Combo (with AMS)","offer_id":42810980597845,"sku":"PF001-U+SA001","price":899.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7517\/2949\/files\/HERO_PF001-U-UK_6959d506-d0cb-44ce-a91a-5ffef04533c7.jpg?v=1785501440"},{"product_id":"bambu-lab-p2s-3d-printer-1","title":"Bambu Lab P2S 3D Printer","description":"\u003cp\u003eThe P2S is the one that stops having caveats. Enclosed, filtered, fast, and — the part that matters most — it ships with a \u003cstrong\u003ehardened steel nozzle and hardened extruder gears\u003c\/strong\u003e as standard. No upgrade path, no \"supported if you buy the right parts\". Carbon fibre, glass fibre, nylon composites: load them and go.\u003c\/p\u003e\n\u003cp\u003eIt's also properly quick. 600 mm\/s toolhead, 40 mm³\/s of flow, 110°C bed. That flow figure is the one to notice — it's what turns a large ABS print from an overnight job into an afternoon one.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eFree with your printer\u003c\/h3\u003e\n\u003cp style=\"padding: 14px 16px; border-left: 3px solid #00A0C4; background: rgba(0,160,196,0.06);\"\u003eAdd \u003cstrong style=\"color: #0d1080;\"\u003ePLA Basic\u003c\/strong\u003e to your cart alongside the printer and we'll take it off automatically at checkout — \u003cstrong\u003e1 free spool\u003c\/strong\u003e with the P2S, \u003cstrong\u003e4 free spools\u003c\/strong\u003e with the Combo. No code needed, any colours you like.\u003cbr\u003e\u003cbr\u003eBoth configurations also include a \u003cstrong style=\"color: #0d1080;\"\u003efree touchscreen protector\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eWhich one should I get?\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"border-bottom: 2px solid rgba(128,128,128,0.35);\"\u003e\n\u003ctd style=\"padding: 10px 12px 10px 0;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px 8px; text-align: center;\"\u003e\u003cstrong\u003eP2S\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 10px 0; text-align: center;\"\u003e\u003cstrong\u003eCombo\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding: 9px 12px 9px 0; opacity: 0.65;\"\u003eColours per print\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 8px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 0; text-align: center;\"\u003eUp to 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding: 9px 12px 9px 0; opacity: 0.65;\"\u003eAMS 2 Pro included\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 8px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 0; text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding: 9px 12px 9px 0; opacity: 0.65;\"\u003eSealed storage\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 8px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 0; text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding: 9px 12px 9px 0; opacity: 0.65;\"\u003eActive drying\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 8px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 0; text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom: 1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding: 9px 12px 9px 0; opacity: 0.65;\"\u003eFree PLA Basic\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 8px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 0; text-align: center;\"\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 9px 12px 9px 0; opacity: 0.65;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 8px; text-align: center;\"\u003e$850\u003c\/td\u003e\n\u003ctd style=\"padding: 9px 0; text-align: center;\"\u003e$1,195\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top: 14px;\"\u003eThe AMS 2 Pro isn't only about colour. Sealed storage with active drying keeps \u003cstrong\u003ePLA, PETG and TPU\u003c\/strong\u003e in good condition between prints — which in Singapore's humidity is worth more than it sounds, since an open spool starts absorbing moisture the day you unwrap it.\u003c\/p\u003e\n\u003cp\u003eWorth knowing what it won't do: PA-CF, PPA-CF and PC need higher drying temperatures than the AMS 2 Pro reaches. For those, use a dedicated filament dryer like the AMS HT and print straight from it.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eRoom to grow\u003c\/h3\u003e\n\u003cp\u003eThe P2S supports \u003cstrong style=\"color: #0d1080;\"\u003eup to 20 colours\u003c\/strong\u003e in a single print — a maximum of 4 AMS 2 Pro units plus 4 AMS HT units connected together.\u003c\/p\u003e\n\u003cp style=\"font-size: 0.9em; opacity: 0.7;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Drying while printing is only supported with the AMS 2 Pro Switching Adapter, sold separately.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color: #0d1080;\"\u003eP2S\u003c\/strong\u003e — P2S 3D Printer, touchscreen protector, plus 1× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #0d1080;\"\u003eP2S Combo\u003c\/strong\u003e — P2S 3D Printer, AMS 2 Pro, touchscreen protector, plus 4× PLA Basic free.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eFilament it likes\u003c\/h3\u003e\n\u003cp\u003eNearly everything. \u003cstrong style=\"color: #0d1080;\"\u003ePLA, PETG, ABS, ASA and TPU\u003c\/strong\u003e are straightforward. \u003cstrong style=\"color: #0d1080;\"\u003ePA, PC and PVA\u003c\/strong\u003e all work, though they're hygroscopic and want thorough drying first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #0d1080;\"\u003eComposites are the point of this machine.\u003c\/strong\u003e PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF and PET-CF are all supported — and unlike every other printer we sell, you don't need to buy a hardened nozzle first. It's already fitted, along with hardened extruder gears.\u003c\/p\u003e\n\u003cp\u003eSupport materials are covered too: Support for PLA, Support for PLA\/PETG and Support for ABS.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eAir handling\u003c\/h3\u003e\n\u003cp\u003eThe P2S filters both \u003cstrong\u003eVOCs and particulates\u003c\/strong\u003e through a granulated coconut shell carbon filter — a meaningful step beyond the P1S's carbon filter alone, and worth knowing if the printer lives somewhere people sleep.\u003c\/p\u003e\n\u003cp\u003eThat said: ventilate the room anyway when running ABS, ASA or nylon. Filtration reduces emissions, it doesn't remove them.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eWarranty \u0026amp; support\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1 year from date of purchase\u003c\/strong\u003e, handled by Convergent Systems Pte Ltd, Bambu Lab's authorised service partner in Singapore.\u003c\/p\u003e\n\u003cp\u003eNo paid setup — the printer walks you through calibration itself. But if you get stuck on settings, slicer profiles or a print that won't behave, ask us. Happy to help.\u003c\/p\u003e\n\u003ch3 style=\"display: inline-block; padding-bottom: 8px; margin-bottom: 12px; background-image: linear-gradient(90deg,#0D1080,#4AC5C5); background-size: 100% 3px; background-repeat: no-repeat; background-position: 0 100%;\"\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e392 × 406 × 478mm\u003c\/strong\u003e and 14.9kg on your desk. Boxed it's 18.25kg, or 21.42kg with the AMS 2 Pro, so delivery lands in our upper weight bands. \u003cstrong\u003eSelf-collection is free\u003c\/strong\u003e and worth considering.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"P2S","offer_id":42811165114453,"sku":"PF004-U","price":850.0,"currency_code":"SGD","in_stock":true},{"title":"P2S Combo (with AMS 2 Pro)","offer_id":42811165147221,"sku":"PF004-U+SA007","price":1195.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7517\/2949\/files\/HERO_PF004-U-UK_90b2276d-87a8-461b-bdce-4901bec55967.webp?v=1785511025"},{"product_id":"bambu-lab-x2d-3d-printer","title":"Bambu Lab X2D 3D Printer","description":"\u003cp\u003eThe X2D is the top of the range in its size class, and the reason is the second hotend. Two independent hotends, each with its own filament path — which means you can print a model in one material while laying down supports in another, without the purge waste that multi-material printing normally costs you.\u003c\/p\u003e\n\u003cp\u003eA highlight feature of this machine is its \u003cstrong\u003eactively heated chamber\u003c\/strong\u003e, up to 65°C, which does not exist on similar machines like the P2S. That's what makes ABS, ASA, PC and nylon composites genuinely reliable rather than merely possible: a warm chamber stops layers cooling unevenly, which is what causes the warping and delamination that ruin tall engineering prints.\u003c\/p\u003e\n\u003cp\u003e1000 mm\/s toolhead. 120°C bed. HEPA H12 filtration. This is the machine you buy when printing is part of how you work, not a weekend thing.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFree with your printer\u003c\/h3\u003e\n\u003cp style=\"padding:14px 16px;border-left:3px solid #00A0C4;background:rgba(0,160,196,0.06);\"\u003eAdd \u003cstrong style=\"color:#0D1080;\"\u003ePLA Basic\u003c\/strong\u003e to your cart alongside the printer and we'll take it off automatically at checkout — \u003cstrong\u003e2 free spools\u003c\/strong\u003e with the X2D, \u003cstrong\u003e4 free spools\u003c\/strong\u003e with the Combo. No code needed, any colours you like.\u003cbr\u003e\u003cbr\u003eBoth configurations also include a \u003cstrong style=\"color:#0D1080;\"\u003efree touchscreen protector\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eTwo hotends, and why it matters\u003c\/h3\u003e\n\u003cp\u003eMost multi-colour printing works by purging — swapping filament in a single hotend and flushing the old colour out, which produces a pile of waste for every change. Two independent hotends sidestep that entirely for two-material prints.\u003c\/p\u003e\n\u003cp\u003eThe practical wins: \u003cstrong\u003esoluble or breakaway supports\u003c\/strong\u003e in a different material from the model, printed properly rather than as a compromise. Two colours with no purge waste. And harder combinations — a rigid body with a flexible section where it needs to give.\u003c\/p\u003e\n\u003cp\u003eThe two hotends work differently by design. The \u003cstrong style=\"color:#0D1080;\"\u003emain hotend is a direct drive extruder\u003c\/strong\u003e — short filament path, precise control, and the one to use for anything demanding. The \u003cstrong style=\"color:#0D1080;\"\u003eauxiliary hotend is fed from an extruder on the rear\u003c\/strong\u003e, which keeps the toolhead light and fast, and is ideally suited to support material and second colours.\u003c\/p\u003e\n\u003cp\u003eBuild volume is 256 × 256 × 260mm on the main hotend, and 235.5 × 256 × 256mm when both are in play.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhich one should I get?\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"border-bottom:2px solid rgba(128,128,128,0.35);\"\u003e\n\u003ctd style=\"padding:10px 12px 10px 0;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px;text-align:center;\"\u003e\u003cstrong\u003eX2D\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;text-align:center;\"\u003e\u003cstrong\u003eCombo\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eColours per print\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003eUp to 2\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eUp to 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eAMS 2 Pro included\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eSealed storage\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eActive drying\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003eFree PLA Basic\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 12px 9px 0;opacity:0.65;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"padding:9px 8px;text-align:center;\"\u003e$1,120\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e$1,450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top:14px;\"\u003eSealed storage with active drying keeps \u003cstrong\u003ePLA, PETG and TPU\u003c\/strong\u003e in good condition between prints — worth more than it sounds in Singapore's humidity, where an open spool starts absorbing moisture the day you unwrap it.\u003c\/p\u003e\n\u003cp\u003eWorth knowing what it won't do: PA-CF, PPA-CF and PC need higher drying temperatures than the AMS 2 Pro reaches. For those, use a dedicated filament dryer like the AMS HT and print straight from it.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eRoom to grow\u003c\/h3\u003e\n\u003cp\u003eThe X2D supports \u003cstrong style=\"color:#0D1080;\"\u003eup to 25 colours\u003c\/strong\u003e in a single print — a maximum of 4 AMS 2 Pro units plus 8 AMS HT units, plus an external spool.\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;opacity:0.7;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Drying while printing is only supported with the AMS 2 Pro Switching Adapter, sold separately.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eX2D\u003c\/strong\u003e — X2D 3D Printer, touchscreen protector, plus 2× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eX2D Combo\u003c\/strong\u003e — X2D 3D Printer, AMS 2 Pro, touchscreen protector, plus 4× PLA Basic free.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFilament it likes\u003c\/h3\u003e\n\u003cp\u003eEffectively everything Bambu makes. \u003cstrong style=\"color:#0D1080;\"\u003ePLA, PETG, ABS and ASA\u003c\/strong\u003e run on either hotend. \u003cstrong style=\"color:#0D1080;\"\u003ePA, PC and PVA\u003c\/strong\u003e too, with proper drying first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eComposites run on both hotends\u003c\/strong\u003e — carbon and glass fibre reinforced PLA, PETG, ABS, ASA, PA6, PAHT and PET-CF. Hardened steel nozzles and hardened extruder gears are fitted as standard, so nothing needs upgrading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eSupport materials belong on the auxiliary hotend\u003c\/strong\u003e, which is exactly what it's built for — Support for PLA, Support for PLA\/PETG and Support for ABS all run there, so your model keeps the main hotend to itself.\u003c\/p\u003e\n\u003cp\u003eA few materials print better on the main hotend: \u003cstrong\u003eTPU and other flexibles\u003c\/strong\u003e should stay on the direct drive side, along with \u003cstrong\u003ePLA Silk, PETG-CF, ASA-CF\u003c\/strong\u003e and \u003cstrong\u003ePA6-CF\u003c\/strong\u003e. PLA Aero is main hotend only.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eAir handling\u003c\/h3\u003e\n\u003cp\u003eThree-stage filtration: a \u003cstrong\u003eG3 pre-filter\u003c\/strong\u003e, an \u003cstrong\u003eH12 HEPA filter\u003c\/strong\u003e, and granulated coconut shell activated carbon. VOCs and particulates both handled, with an external exhaust fan.\u003c\/p\u003e\n\u003cp\u003eThis is the most thorough air handling in the range, and the reason the X2D is the sensible choice if it's going in a shared workspace or a room people spend time in. Still ventilate when running ABS, ASA or nylon — filtration reduces emissions, it doesn't remove them.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWarranty \u0026amp; support\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1 year from date of purchase\u003c\/strong\u003e, handled by Convergent Systems Pte Ltd, Bambu Lab's authorised service partner in Singapore.\u003c\/p\u003e\n\u003cp\u003eNo paid setup — the printer walks you through calibration itself. But if you get stuck on settings, slicer profiles or a print that won't behave, ask us. Happy to help.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e392 × 406 × 478mm\u003c\/strong\u003e and 16.25kg on your desk. Boxed it's 20kg, or 22.05kg with the AMS 2 Pro, so delivery lands in our upper weight bands. \u003cstrong\u003eSelf-collection is free\u003c\/strong\u003e and worth considering.\u003c\/p\u003e\n\u003cp\u003ePower draw peaks at 1600W at 220V when the chamber and bed are heating. That's a kettle's worth — worth a thought about which circuit it shares.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"X2D","offer_id":42812867346517,"sku":"PF004-P","price":1120.0,"currency_code":"SGD","in_stock":false},{"title":"X2D Combo (with AMS 2 Pro)","offer_id":42812867379285,"sku":"PF004-P+SA007","price":1490.0,"currency_code":"SGD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7517\/2949\/files\/HERO_PF004-P-UK_ce232e20-337e-4cc9-8ea7-a21bd9de3879.webp?v=1785550842"},{"product_id":"bambu-lab-h2s-3d-printer","title":"Bambu Lab H2S 3D Printer","description":"\u003cp\u003eThe H2S has the largest build volume in the Bambu Lab lineup — \u003cstrong\u003e340 × 320 × 340mm\u003c\/strong\u003e. Full-scale helmets, large enclosures, tall functional parts, all in one piece.\u003c\/p\u003e\n\u003cp\u003eUnderneath the size, it's a serious machine. 350°C hotend, 120°C bed, an actively heated chamber to 65°C, and the widest material compatibility Bambu offers — including PPS and PPA composites that most desktop printers can't touch. Hardened steel nozzle and gears as standard.\u003c\/p\u003e\n\u003cp\u003e1000 mm\/s toolhead, 40 mm³\/s flow as shipped, or 65 mm³\/s with the optional high-flow hotend.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFree with your printer\u003c\/h3\u003e\n\u003cp style=\"padding:14px 16px;border-left:3px solid #00A0C4;background:rgba(0,160,196,0.06);\"\u003eAdd \u003cstrong style=\"color:#0D1080;\"\u003ePLA Basic\u003c\/strong\u003e to your cart alongside the printer and we'll take it off automatically at checkout — \u003cstrong\u003e2 free spools\u003c\/strong\u003e with the H2S and the H2S Combo, \u003cstrong\u003e4 free spools\u003c\/strong\u003e with the H2S 10W Combo. No code needed, any colours you like.\u003cbr\u003e\u003cbr\u003eBoth Combo configurations also include an \u003cstrong style=\"color:#0D1080;\"\u003eadditional 0.6mm hardened steel hotend\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhich one should I get?\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"border-bottom:2px solid rgba(128,128,128,0.35);\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 6px;text-align:center;\"\u003e\u003cstrong\u003eH2S\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 6px;text-align:center;\"\u003e\u003cstrong\u003eH2S Combo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;text-align:center;\"\u003e\u003cstrong\u003eH2S 10W Combo\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eColours per print\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003eUp to 4\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eUp to 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eAMS 2 Pro included\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eLaser Module\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e10W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eFree PLA Basic\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e$1,790\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e$2,090\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e$2,980\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top:14px;\"\u003eNothing is locked in at purchase. The \u003cstrong\u003elaser, cutting and drawing modules can all be added later\u003c\/strong\u003e — the base H2S upgrades to laser capability through the Laser Upgrade Kit, which includes the safety windows and air assist pump.\u003c\/p\u003e\n\u003cp\u003eThe H2S 10W Combo simply saves you doing it twice. Its \u003cstrong style=\"color:#0D1080;\"\u003elaser safety windows\u003c\/strong\u003e shield your eyes while keeping the workspace clear and visible, so you can watch the job without goggles.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eRoom to grow\u003c\/h3\u003e\n\u003cp\u003eThe H2S supports \u003cstrong style=\"color:#0D1080;\"\u003eup to 24 colours\u003c\/strong\u003e in a single print — a maximum of 4 AMS 2 Pro units plus 8 AMS HT units.\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;opacity:0.7;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Drying while printing is only supported with the AMS 2 Pro Switching Adapter, sold separately.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eMore than a printer\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003e10W laser\u003c\/strong\u003e — engraves and cuts wood, leather, rubber, metal sheet, dark acrylic and stone. Up to 5mm cutting depth in basswood plywood, 400 mm\/s engraving, 310 × 260mm working area. Visual positioning and micro-lidar height measurement, with flame and temperature detection built in. Rated Class 1 overall when the enclosure is properly closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eBlade cutting and pen plotting\u003c\/strong\u003e — vinyl, stickers, paper, PVC, leather. 297.5 × 300mm cutting area, 300 × 255mm drawing area.\u003c\/p\u003e\n\u003cp\u003eCutting and drawing modules are sold separately and aren't included with any configuration here.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eH2S\u003c\/strong\u003e — H2S 3D Printer, plus 2× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eH2S Combo\u003c\/strong\u003e — H2S 3D Printer, AMS 2 Pro, additional 0.6mm hardened steel hotend, plus 2× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eH2S Full 10W Combo\u003c\/strong\u003e — H2S 3D Printer, AMS 2 Pro, 10W laser module with safety windows, additional 0.6mm hardened steel hotend, plus 4× PLA Basic free.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFilament it likes\u003c\/h3\u003e\n\u003cp\u003eThe widest range Bambu supports. \u003cstrong style=\"color:#0D1080;\"\u003ePLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA and PPS\u003c\/strong\u003e all run on this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eComposites are fully supported\u003c\/strong\u003e — carbon and glass fibre reinforced PLA, PETG, PA, PC, ABS, ASA, PPA and PPS. Hardened steel nozzle and gears are fitted as standard, so nothing needs upgrading first.\u003c\/p\u003e\n\u003cp\u003eThe 350°C hotend is what opens up PPS and PPA — genuinely high-temperature engineering materials that a 300°C machine can't reach.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eAir handling\u003c\/h3\u003e\n\u003cp\u003eThree-stage: a \u003cstrong\u003eG3 pre-filter\u003c\/strong\u003e, an \u003cstrong\u003eH12 HEPA filter\u003c\/strong\u003e, and granulated coconut shell activated carbon, with superior-grade VOC filtration and a dedicated chamber exhaust fan.\u003c\/p\u003e\n\u003cp\u003eAdequate ventilation of the work area is still recommended when running ABS, ASA, nylon or PPS — filtration reduces emissions, it doesn't remove them. If you're using the laser, ventilation ducting or the Bambu Lab Smoke Purifier is advised.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWarranty \u0026amp; support\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1 year from date of purchase\u003c\/strong\u003e, handled by Convergent Systems Pte Ltd, Bambu Lab's authorised service partner in Singapore.\u003c\/p\u003e\n\u003cp\u003eNo paid setup — the printer walks you through calibration itself. But if you get stuck on settings, slicer profiles or a print that won't behave, ask us. Happy to help.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eThis is a large, heavy machine — \u003cstrong\u003e492 × 514 × 626mm\u003c\/strong\u003e and \u003cstrong\u003e30kg\u003c\/strong\u003e on your bench. Boxed it's 37.5 to 45.8kg depending on configuration. Measure your space, and plan to have someone help you lift it.\u003c\/p\u003e\n\u003cp\u003ePower draw peaks at 2050W at 220V. That's more than most kettles — give it a circuit it isn't sharing with much else.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelf-collection is free\u003c\/strong\u003e and worth serious consideration at this weight.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"H2S","offer_id":42813470703701,"sku":"PF003-S","price":1790.0,"currency_code":"SGD","in_stock":false},{"title":"H2S Combo (with AMS 2 Pro)","offer_id":42813470736469,"sku":"PF003-S+SA007","price":2090.0,"currency_code":"SGD","in_stock":false},{"title":"H2S Full 10W Combo (with AMS 2 Pro and 10W Laser)","offer_id":42813470769237,"sku":"PF003-L+SA007","price":2980.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7517\/2949\/files\/HERO_PF003-S-UK_59fe1d65-d4cb-440b-884c-43a9845786fc.webp?v=1785567658"},{"product_id":"bambu-lab-h2d-3d-printer","title":"Bambu Lab H2D 3D Printer","description":"\u003cp\u003eIf you print functional parts for a living, the H2D is the one. Dual hotends, a 350°C ceiling, an actively heated chamber and 325 × 320 × 325mm of space — it balances a large build volume against full dual-hotend capability better than anything else Bambu makes.\u003c\/p\u003e\n\u003cp\u003eThe second hotend is what separates it from the H2S. Soluble supports in a different material from the model, two materials in one print with no purge waste, rigid bodies with flexible sections. On engineering work that's not a novelty — it's the difference between a part you can use and a part you have to redesign around.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFree with your printer\u003c\/h3\u003e\n\u003cp style=\"padding:14px 16px;border-left:3px solid #00A0C4;background:rgba(0,160,196,0.06);\"\u003eAdd \u003cstrong style=\"color:#0D1080;\"\u003ePLA Basic\u003c\/strong\u003e to your cart alongside the printer and we'll take it off automatically at checkout — \u003cstrong\u003e2 free spools\u003c\/strong\u003e with the H2D, \u003cstrong\u003e6 free spools\u003c\/strong\u003e with every Combo. No code needed, any colours you like.\u003cbr\u003e\u003cbr\u003eLaser configurations also include \u003cstrong style=\"color:#0D1080;\"\u003etwo additional 0.6mm hardened steel hotends\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhich one should I get?\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-size:0.95em;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"border-bottom:2px solid rgba(128,128,128,0.35);\"\u003e\n\u003ctd style=\"padding:10px 6px 10px 0;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 4px;text-align:center;\"\u003e\u003cstrong\u003eH2D\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 4px;text-align:center;\"\u003e\u003cstrong\u003eCombo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 4px;text-align:center;\"\u003e\u003cstrong\u003e10W\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;text-align:center;\"\u003e\u003cstrong\u003e40W\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 6px 9px 0;opacity:0.65;\"\u003eColours per print\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003eUp to 2\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003eUp to 5\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003eUp to 5\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eUp to 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 6px 9px 0;opacity:0.65;\"\u003eAMS 2 Pro\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 6px 9px 0;opacity:0.65;\"\u003eLaser Module\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003e10W\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 6px 9px 0;opacity:0.65;\"\u003eFree PLA Basic\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 6px 9px 0;opacity:0.65;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003e$2,620\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003e$2,750\u003c\/td\u003e\n\u003ctd style=\"padding:9px 4px;text-align:center;\"\u003e$3,820\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e$4,690\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top:14px;\"\u003eAt $130 apart, the \u003cstrong style=\"color:#0D1080;\"\u003eCombo\u003c\/strong\u003e is close to a non-decision — the AMS 2 Pro plus four extra spools is worth more than the gap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003e10W versus 40W laser:\u003c\/strong\u003e the 10W cuts up to 5mm of basswood plywood at 400 mm\/s. The 40W cuts 15mm at 1000 mm\/s. If lasering is occasional, the 10W is plenty. If it's a production process, the 40W pays for itself in time.\u003c\/p\u003e\n\u003cp\u003eNothing is locked in at purchase — the \u003cstrong\u003elaser, cutting and drawing modules can all be added later\u003c\/strong\u003e. The base H2D upgrades through the Laser Upgrade Kit, which includes the safety windows and air assist pump.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eRoom to grow\u003c\/h3\u003e\n\u003cp\u003eThe H2D supports \u003cstrong style=\"color:#0D1080;\"\u003eup to 25 colours\u003c\/strong\u003e in a single print — a maximum of 4 AMS 2 Pro units plus 8 AMS HT units.\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;opacity:0.7;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Drying while printing is only supported with the AMS 2 Pro Switching Adapter, sold separately.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eH2D\u003c\/strong\u003e — H2D 3D Printer, plus 2× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eH2D Combo\u003c\/strong\u003e — H2D 3D Printer, AMS 2 Pro, plus 6× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eH2D Full 10W Combo\u003c\/strong\u003e — H2D 3D Printer, AMS 2 Pro, 10W laser module with safety windows, 2× additional 0.6mm hardened steel hotends, plus 6× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eH2D Full 40W Combo\u003c\/strong\u003e — H2D 3D Printer, AMS 2 Pro, 40W laser module with safety windows, 2× additional 0.6mm high-flow hardened steel hotends, plus 6× PLA Basic free.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eMore than a printer\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eLaser\u003c\/strong\u003e — engraves and cuts wood, leather, rubber, metal sheet, dark acrylic and stone. Visual positioning, micro-lidar height measurement, flame and temperature detection. Rated Class 1 overall with the enclosure closed. Engraving area 310 × 270mm on the 10W, 310 × 250mm on the 40W.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eBlade cutting and pen plotting\u003c\/strong\u003e — paper, vinyl, leather. 300 × 285mm cutting area, 300 × 255mm drawing area. Modules sold separately.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFilament it likes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003ePLA, PETG, TPU, PVA, ABS, ASA, PC and PA\u003c\/strong\u003e all run here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eComposites are fully supported\u003c\/strong\u003e — carbon and glass fibre reinforced PLA, PETG, PA, PC, ABS, ASA, PPA, PPS and PET-CF. Hardened steel nozzles and gears fitted as standard, so nothing needs upgrading first.\u003c\/p\u003e\n\u003cp\u003eThe 350°C hotend and heated chamber are what make PPS and PPA viable — genuinely high-temperature engineering materials that a 300°C open-frame machine can't touch.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eAir handling\u003c\/h3\u003e\n\u003cp\u003eThree-stage: a \u003cstrong\u003eG3 pre-filter\u003c\/strong\u003e, an \u003cstrong\u003eH12 HEPA filter\u003c\/strong\u003e, and granulated coconut shell activated carbon, with a dedicated chamber exhaust fan.\u003c\/p\u003e\n\u003cp\u003eAdequate ventilation of the work area is still recommended when running ABS, ASA, nylon or PPS — filtration reduces emissions, it doesn't remove them. If you're using the laser, ventilation ducting or the Bambu Lab Smoke Purifier is advised.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWarranty \u0026amp; support\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1 year from date of purchase\u003c\/strong\u003e, handled by Convergent Systems Pte Ltd, Bambu Lab's authorised service partner in Singapore.\u003c\/p\u003e\n\u003cp\u003eNo paid setup — the printer walks you through calibration itself. But if you get stuck on settings, slicer profiles or a print that won't behave, ask us. Happy to help.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eLarge and heavy — \u003cstrong\u003e492 × 514 × 626mm\u003c\/strong\u003e and \u003cstrong\u003e31kg\u003c\/strong\u003e on your bench, 39 to 45.8kg boxed. Measure your space, and plan to have someone help you lift it.\u003c\/p\u003e\n\u003cp\u003ePower peaks at 2200W at 220V. Give it a circuit it isn't sharing with much else.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelf-collection is free\u003c\/strong\u003e and worth serious consideration at this weight.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"H2D","offer_id":42813812277333,"sku":"PF003-D","price":2620.0,"currency_code":"SGD","in_stock":false},{"title":"H2D Combo (with AMS 2 Pro)","offer_id":42813812310101,"sku":"PF003-D+SA007","price":2750.0,"currency_code":"SGD","in_stock":true},{"title":"H2D Full 10W Combo (with AMS 2 Pro and 10W Laser)","offer_id":42813812342869,"sku":"PF003-M+SA007+SL001","price":3820.0,"currency_code":"SGD","in_stock":false},{"title":"H2D Full 40W Combo (with AMS 2 Pro and 40W Laser)","offer_id":42813812375637,"sku":"PF003-M+SA007+SL002","price":4690.0,"currency_code":"SGD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7517\/2949\/files\/HERO_PF003-D-UK1_134e0917-4268-4e80-b6bc-e0b2e5c9fc37.webp?v=1785584043"},{"product_id":"bambu-lab-h2c-3d-printer","title":"Bambu Lab H2C 3D Printer","description":"\u003cp\u003eThe H2C is Bambu Lab's 2026 flagship, and it's built for people with limitless imagination. Dual extruders, 350°C, actively heated chamber, 120°C bed, and the broadest material range in the lineup — but the headline is what it does with colour.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eUp to 7 colours with no purge waste.\u003c\/strong\u003e Conventional multi-colour printing flushes the old filament out of the nozzle at every change, and on a colourful model that pile of purged plastic can outweigh the part itself.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong style=\"color:#0D1080;\"\u003eVortek system\u003c\/strong\u003e solves it mechanically instead. A built-in rack docks six induction hotends, and the right extruder swaps between them mid-print. Add the standard left hotend and that's seven filaments, each with its own nozzle — so there's nothing to purge, because nothing shares a melt zone. On a production run, that's material cost and print time you simply stop paying.\u003c\/p\u003e\n\u003cp\u003eThose hotends are induction-heated, so they reach temperature faster than conventional hotends — which matters when a job involves hundreds of swaps.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFree with your printer\u003c\/h3\u003e\n\u003cp style=\"padding:14px 16px;border-left:3px solid #00A0C4;background:rgba(0,160,196,0.06);\"\u003eAdd \u003cstrong style=\"color:#0D1080;\"\u003ePLA Basic\u003c\/strong\u003e to your cart alongside the printer and we'll take it off automatically at checkout — \u003cstrong\u003e6 free spools\u003c\/strong\u003e with the H2C Combo, \u003cstrong\u003e8\u003c\/strong\u003e with the 10W, \u003cstrong\u003e10\u003c\/strong\u003e with the 40W. No code needed, any colours you like.\u003cbr\u003e\u003cbr\u003eEvery configuration also includes an \u003cstrong style=\"color:#0D1080;\"\u003eadditional 0.6mm hardened steel standard hotend\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhich one should I get?\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"border-bottom:2px solid rgba(128,128,128,0.35);\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 6px;text-align:center;\"\u003e\u003cstrong\u003eH2C Combo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 6px;text-align:center;\"\u003e\u003cstrong\u003e10W\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;text-align:center;\"\u003e\u003cstrong\u003e40W\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eColours per print\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003eUp to 5\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003eUp to 5\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eUp to 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eAMS 2 Pro\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eLaser Module\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e10W\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"border-bottom:1px solid rgba(128,128,128,0.22);\"\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003eFree PLA Basic\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e6\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e8\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:9px 8px 9px 0;opacity:0.65;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e$3,490\u003c\/td\u003e\n\u003ctd style=\"padding:9px 6px;text-align:center;\"\u003e$4,140\u003c\/td\u003e\n\u003ctd style=\"padding:9px 0;text-align:center;\"\u003e$4,880\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top:14px;\"\u003e\u003cstrong style=\"color:#0D1080;\"\u003e10W versus 40W laser:\u003c\/strong\u003e the 10W cuts up to 5mm of basswood plywood at 400 mm\/s. The 40W cuts 15mm at 1000 mm\/s. Occasional lasering, take the 10W. A production process, take the 40W.\u003c\/p\u003e\n\u003cp\u003eNothing is locked in at purchase — the \u003cstrong\u003elaser, cutting and drawing modules can all be added later\u003c\/strong\u003e through the Laser Upgrade Kit, which includes the safety windows and air assist pump.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eRoom to grow\u003c\/h3\u003e\n\u003cp\u003eThe H2C supports \u003cstrong style=\"color:#0D1080;\"\u003eup to 25 colours\u003c\/strong\u003e in a single print — a maximum of 4 AMS 2 Pro units plus 8 AMS HT units.\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;opacity:0.7;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Drying while printing is only supported with the AMS 2 Pro Switching Adapter, sold separately.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eH2C Combo\u003c\/strong\u003e — H2C 3D Printer, AMS 2 Pro, additional 0.6mm hardened steel standard hotend, plus 6× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eH2C Full 10W Combo\u003c\/strong\u003e — H2C 3D Printer, AMS 2 Pro, 10W laser module with safety windows, additional 0.6mm hardened steel standard hotend, plus 8× PLA Basic free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eH2C Full 40W Combo\u003c\/strong\u003e — H2C 3D Printer, AMS 2 Pro, 40W laser module with safety windows, additional 0.6mm hardened steel standard hotend, plus 10× PLA Basic free.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eMore than a printer\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eLaser\u003c\/strong\u003e — engraves and cuts wood, leather, rubber, metal sheet, dark acrylic and stone. Visual positioning, micro-lidar height measurement, flame and temperature detection. Rated Class 1 overall with the enclosure closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eBlade cutting and pen plotting\u003c\/strong\u003e — paper, vinyl, leather. Modules sold separately.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eFilament it likes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003ePLA, PETG, TPU, PVA, ABS, ASA, PC, PA and PPS\u003c\/strong\u003e all run here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color:#0D1080;\"\u003eComposites are fully supported\u003c\/strong\u003e — carbon and glass fibre reinforced PLA, PETG, PA, PC, ABS, ASA, PPA, PPS and PET-CF. Hardened steel nozzles and gears fitted as standard, so nothing needs upgrading first.\u003c\/p\u003e\n\u003cp\u003eThe 350°C hotends and heated chamber are what make PPS and PPA viable — genuinely high-temperature engineering materials that most machines can't touch.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eAir handling\u003c\/h3\u003e\n\u003cp\u003eThree-stage: a \u003cstrong\u003eG3 pre-filter\u003c\/strong\u003e, an \u003cstrong\u003eH12 HEPA filter\u003c\/strong\u003e, and granulated coconut shell activated carbon, with superior-grade VOC filtration and a dedicated chamber exhaust fan.\u003c\/p\u003e\n\u003cp\u003eAdequate ventilation of the work area is still recommended when running ABS, ASA, nylon or PPS — filtration reduces emissions, it doesn't remove them. If you're using the laser, ventilation ducting or the Bambu Lab Smoke Purifier is advised.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eWarranty \u0026amp; support\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1 year from date of purchase\u003c\/strong\u003e, handled by Convergent Systems Pte Ltd, Bambu Lab's authorised service partner in Singapore.\u003c\/p\u003e\n\u003cp\u003eNo paid setup — the printer walks you through calibration itself. But if you get stuck on settings, slicer profiles or a print that won't behave, ask us. Happy to help.\u003c\/p\u003e\n\u003ch3 style=\"display:inline-block;padding-bottom:8px;margin-bottom:12px;background-image:linear-gradient(90deg,#0D1080,#4AC5C5);background-size:100% 3px;background-repeat:no-repeat;background-position:0 100%;\"\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eLarge and heavy — \u003cstrong\u003e492 × 514 × 626mm\u003c\/strong\u003e and \u003cstrong\u003e32.5kg\u003c\/strong\u003e on your bench, 41.75 to 43.08kg boxed. Measure your space, and plan to have someone help you lift it.\u003c\/p\u003e\n\u003cp\u003ePower peaks at 1800W at 220V. Give it a circuit it isn't sharing with much else.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelf-collection is free\u003c\/strong\u003e and worth serious consideration at this weight.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"H2C Combo (with AMS 2 Pro)","offer_id":42813816242261,"sku":"PF003-C+SA007","price":3490.0,"currency_code":"SGD","in_stock":true},{"title":"H2C Full 10W Combo (with AMS 2 Pro and 10W Laser)","offer_id":42813816275029,"sku":"PF003-N+SA007+SL001","price":4140.0,"currency_code":"SGD","in_stock":true},{"title":"H2C Full 40W Combo (with AMS 2 Pro and 40W Laser)","offer_id":42813816307797,"sku":"PF003-N+SA007+SL002","price":4880.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7517\/2949\/files\/HERO_PF003-C_SA007-UK_c6524ad5-0611-4861-af19-94fa2e81de94.webp?v=1785584149"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7517\/2949\/collections\/Printer_Cards-01.png?v=1769858375","url":"https:\/\/cybercraftcreations.com\/collections\/3d-printers.oembed","provider":"CyberCraft Creations","version":"1.0","type":"link"}