Bambu Lab P1S 3D Printer

The P1S is where the A-series stops being enough. Same 256mm cubed build volume as the A1, but wrapped in a glass-and-plastic enclosure with an activated carbon filter — and that changes what you can print.

Enclosed means a warm, stable chamber. Warm and stable means ABS, ASA, PA and PC stop warping halfway up and start behaving. If you've been printing functional parts in PLA and quietly wishing they could survive a hot car, a dishwasher, or direct sun, this is the machine that gets you there.

It's also quicker than the A-series where it counts: 32 mm³/s of flow against 28 mm³/s, and 20,000 mm/s² of acceleration against 10,000 mm/s².

Free with your printer

Add PLA Basic to your cart alongside the printer and we'll take it off automatically at checkout — 2 free spools with the P1S, 4 free spools with the Combo. No code needed, any colours you like.

The Combo also includes a BIQU Cryogrip Pro Frostbite build plate.

Which one should I get?

The AMS isn't just about colour. It's a sealed box with desiccant, which in Singapore's climate means your loaded filament stays dry between prints instead of slowly going brittle on an open spool holder. It also tracks how much filament is left on each roll. Counting the free spools and the build plate, the Combo is close to break-even on the $250 difference.

What's included

P1S — P1S 3D Printer, plus 2× PLA Basic free.

P1S Combo — P1S 3D Printer, AMS, BIQU Cryogrip Pro Frostbite build plate, plus 4× PLA Basic free.

Filament it likes

PLA, PETG, TPU, ABS and ASA all run well. The enclosure and carbon filter are exactly what ABS and ASA need — no warping, no smell filling the room.

PVA, PA and PC are within reach too, but all three are hygroscopic and demanding. Dry them thoroughly before printing, and ideally print straight from a dryer.

Carbon and glass fibre reinforced filaments aren't recommended on the P1S as it ships — the stainless nozzle won't survive them. A hardened steel nozzle is the minimum if you want to try, and we stock those.

Warranty & support

1 year from date of purchase, handled by Convergent Systems Pte Ltd, Bambu Lab's authorised service partner in Singapore.

No paid setup — the printer walks you through calibration itself. But if you get stuck on settings, slicer profiles or a print that won't behave, ask us. Happy to help.

Before you order

389 × 389 × 458mm and 12.95kg on your desk. Boxed it's 17.7kg, or 21.6kg with the AMS, so delivery lands in our upper weight bands. Self-collection is free and worth considering.

Printing ABS or ASA? Put it somewhere ventilated regardless of the filter — enclosure and carbon filtration reduce fumes, they don't eliminate them.